ICP spectrometerLD-LICP-A10detects trace elements using argon plasma where the atomized liquid sample is injected. With an analyzing rate of 26 elements per minute results can be achieved with lower levels of detection and measurement of trace and ultra-trace elements. Elements can be traced from liquid and solid samples. Detection of liquid flow from the spray chamber by optical drain sensor offers exceptional sensitivity and accuracy.
| Humidity | 70% |
| Gas source | Argon ( 99.99 % ) |
| Temperature | 20 ~ 28 °C |
| Focal length | 1000 mm |
| Coil diameter | 25 mm ( 3 turn ) |
| Incident slit | 20 µm |
| Resolving power | ≤ 0.008 nm |
| Mirror dimensions | 78 x 105 x 16 mm |
| Standard deviation | RSD ≤ 1.0 % |
| Elements per minute | 26 elements |
| Line dispersion rate | 0.26 nm |
| Plasma gas flow meter | 100 ~ 1000 L / h |
| Water outlet diameter | Ø 10 mm |
| Carrier gas flow meter | 10 ~ 100 L / h |
| Cooling water flow rate | 5 liters per min |
| Correlation coefficient | ≥ 0.9998 |
| Auxillary gas flow meter | 10 ~ 100 L / h |
| Double room fog diameter | 34 mm |
| Co-axial sprayer diameter | 6 mm |
| Cooling water temperature | 21 ~ 26 °C |
| Quartz tube torch diameter | 20 mm |
| Wavelength range ( 2400 lines / mm ) | 180 to 800 nm |
| Wavelength range ( 3600 lines / mm ) | 180 to 500 nm |
Used in clinical analysis for detection of metals in biological fluids , environmental analysis for trace element detection in water , soil , plants , pharmaceuticals for traces of catalysts and poison metals like Cd , Pb , industries for noble metal detection
Atomic Fluorescence Spectrometer LAFS-A10
✓ Beam Configuration : Dual Channel
✓ Elements ( Measuring Range ) :
As, Se, Pb, Bi, Sb, Te, Sn
< 0.01 µg/L
Hg, Cd
< 0.001 µg/L
Zn
< 1.0 µg/L
Ge
< 0.1 µg/L
Angular Spectrometer LASM-A10
✓ Angle Measurement Accuracy : 1inch
FTIR Spectrometer LIR-A10
✓ Spectral Range : 7800 to 350cm-1
✓ Resolution : Better than 0.85cm-1
FTIR Spectrometer LIR-B10
✓ Spectral Range : 7800 cm-1 to 350 cm-1
✓ Resolution : 0.85 cm-1
