Aging Oven TAO-A10 ✓ The maximum temperature : 300°C ✓ Temperature fluctuation : Within ± 0.5°C ✓ Temperature uniformity : Within ± 1°C Charpy/ Izod Impact Tester TCI-A10 ✓ Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J ✓ Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J ✓ Resolution of impact energy : 0.001 J Falling Weight Impact Tester TFWT-A10 ✓ Temperature range : 10 to 35°C ✓ Maximum falling height : 2000 mm ✓ Resolution of displacement : 1 mm Heat sealer THS-A10 ✓ Seal temperature : Room temperature -250°C ✓ Control accuracy : ± 0.2°C ✓ Dwell time : 0.1 S to 999.9 S Lasting adhesive tester TLAT-A10 ✓ Standard roller : 2000 ± 50 g ✓ Testing stations : 3 ✓ Dimension (L*W*H) tester : 320×210×550 mm (3 stations) Lasting adhesive tester TLAT-A11 ✓ Standard roller : 2000 ± 50 g ✓ Testing stations : 6 ✓ Dimension (L*W*H) tester : 650×210×550 mm (6 stations) Melt flow Indexer TMFI-A10 ✓ Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density) ✓ Measuring rate : 0.001 S ✓ Temperature range : 50 to 400°C Melt flow Indexer TMFI-A11 ✓ Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density) ✓ Measuring rate : 0.001 S ✓ Temperature range : 50 to 400°C Notch Cutter TNC-A10 ✓ Cutting tool distance : 16 mm ✓ Cutting tool parameter Model A : 45°± 30’ & r=0.25 ± 0.025 ✓ Cutting tool parameter Model B : 45°± 30’ & r=1.0 ± 0.025 Oxygen Index Tester TOIT-A10 ✓ Resolution : 0.1 % O2 ✓ Measuring range : 0 to 100 % O2 ✓ Precision : ± 0.4 % O2 Primary adhesive tester TPAT-A10 ✓ Inclined adjustable angle : 0 to 40° ✓ Panel width : 120 mm ✓ Test area width : 80 mm Vacuum Leak Tester TVLT-A10 ✓ Vacuum degree : 0 to 90 KPa ✓ Accuracy : 1 % FS ✓ Resolution : 0.1 KPa Vicat softening temperature & HDT machine TVHT-A10 ✓ Operating temperature : Ambient temperature to 300°C ✓ Heating rate : 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min) ✓ Maximum temp. error with heating speed : ± 5°C under 50°C/ h, ± 1°C under 120°C/ h